Kenwood KTC-H2A1 User Manual
Page 16
reappears. Repeat Steps 3 – 4.
5. Using the preset 1 – 6 buttons, enter your new 4-digit
code. The screen’s second line will change from
“_ _ _ _” to “* * * *”.
6. Press the MEMORY button. The Confirm Number
screen appears (right).
7. Re-enter your new 4-digit code. The screen’s second
line will change from “_ _ _ _” to “* * * *”.
8. Press the MEMORY button. The display will change to “New Code Confirmed”
• If you entered the code incorrectly, “Code Error” will be displayed, and the Enter New Lock Code screen
reappears. Repeat Steps 5 – 8.
Startup Mode
You can select which screen is displayed when you turn Here
2
Anywhere’s power on.
1. While in the Setup Mode, press the left or right arrow
button until the Startup Mode screen appears (right):
2. Use the up & down arrow buttons to highlight
the screen you want for Startup: Normal Operation,
Channel List (Stream List) or Category List
(see pages 17 – 18):
3. Press the SELECT button.
Here
2
Anywhere Instruction Manual (ver. 2)
31
To lock a stream, in Step 3 above, instead of momentarily pressing the SELECT button, hold the button for
more than 1 second. A “–” and a padlock will be displayed next to the stream number.
Lock Code Setup
If you have locked any streams in the Channel Lock
mode, you will need to enter a 4-digit lock code to
unlock them. The factory default lock code is “1 1 1 1”.
You can change the Lock Code to your own preference:
1. While in the Setup Mode, press the left or right arrow but-
ton until the Lock Code Setup screen appears (top right):
2. Press the up or down arrow button. The Lock Code
screen appears (middle, right):
3. Using the preset 1 – 6 buttons, enter the factory
default code “1 1 1 1”. The screen’s second line will
change from “_ _ _ _” to “* * * *”.
• If you enter an incorrect number, use the left arrow
button to delete the incorrect number; then
re-enter the correct one.
4. Press the Memory button. The Enter New Lock Code
screen appears (bottom, right).
• If you entered the code incorrectly, “Code Error” will
be displayed, and the Enter New Lock Code screen
Here
2
Anywhere Instruction Manual (ver. 2)
30
Lock Code Screen
Enter New Lock Code Screen
Confirm Number Screen
Startup Mode Screen
Lock Code Setup Screen