Kenwood TK-7160 - Manual (Page 21)

15
D
IALING
S
TORED
DTMF N
UMBERS
1 Press the microphone key.
• “ ” appears on the display.
2 Enter the desired memory location number (1 ~ 9).
• The digits stored in the selected location number appear on the display.
• To cancel, press any key other than the PTT switch.
3 Press the PTT switch.
• If programmed by your dealer, no DTMF tone will sound when “D” is transmitted.
“D” can be used for a pause duration. The pause duration is programmed by your
dealer.
C
LEARING
S
TORED
DTMF N
UMBERS
1 Press the microphone # key.
• “ ” appears on the display.
2 Press the microphone # key again.
• “ ” appears on the display.
• To cancel, press any key other than 1 ~ 9.
3 Enter the memory location number (1 ~ 9) you want to clear.
• The memory location number is cleared and the display returns to normal.
R
EDIALING
1 Press the microphone key.
• “ ” appears on the display.
2 Press the microphone 0 key.
• The digits last dialed appear on the display.
• If there is no data in the redial memory, an error tone will sound.
• To cancel, press any key other than the PTT switch.
3 Press the PTT switch.
Note: Switching the transceiver power OFF clears the redial memory.
S
TUN
This function is used when a transceiver is stolen or lost. When the transceiver
receives a call containing a stun code, either transmit mode will be disabled, or
both receive mode and transmit mode will be disabled. The stun code is
cancelled when the transceiver receives a call with a revive code.