Kenwood KDC-225 - Manual (Page 26)

English
— 26 — — 26 —
P. CONT
TEL MUTE
ANT CONT
FRONT L
FRONT R
REAR L
REAR R
– +
REAR
L
R
FM/AM antenna input 1
Fuse (10A)
24
2 KENWOOD disc changer control input
Wiring harness
(Accessory1)
25
29
White/Black
32
Gray/Black
35
Green/Black
38
Purple/Black
White
31
Gray
34
Green
37
Purple
40
To front left
speaker
30
To front right
speaker
33
To rear right
speaker
39
To rear left
speaker
36
Ignition wire (Red) 20
Battery wire (Yellow) 21
Ground wire (Black) · (To car chassis) 22
Ignition key
switch
10
Car fuse box
(Main fuse)
11
ACC 13
Car fuse
box
14
Battery 12
If no connections are made, do not let the wire come out from the tab. 4a
Rear left output (White) 26 Rear right output (Red) 27
To connect the Disc changer,
consult your Disc changer
manual.
3
Connecting Wires to Terminals
Not Used
9b
Do not let the wire
come out from the tab.
4b
(Blue) 17
Power control/ Motor antenna
control wire (Blue/White).
20
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
23
Not Used
9b
(Brown) 7
KDC-MP225B_U.S 04.12.10 11:19 AM Page 26