Kenwood KDC-225 - Manual (Page 11)

Clock
In CD (KDC-MP225B/KDC-MP225) & External disc source
Information Display
Disc title & Artist name "D-TITLE"
Track title "T-TITLE"
Play time & Track number "P-TIME"
Disc name ( In External disc source ) "DNPS"
Clock
In CD (KDC-225MR/KDC-225/KDC-2025)
Information Display
Play time & Track number "P-TIME"
Disc name "DNPS"
Clock
In MP3/WMA source (KDC-MP225B/KDC-MP225)
Information Display
Song title & Artist name "TITLE"
Album name & Artist name "ALBUM"
Folder name "FLDR-NAME"
File name "FILE-NAME"
Play time & Track number "P-TIME"
Clock
In Auxiliary input source
Information
Auxiliary input name
Clock
• If the Disc title, Track title, Song title & Artist name, or Album
name & Artist name is selected when the disc which does not
have Disc title, Track title, Song title, Album name, or Artist name
is played, track number and play time are displayed.
• The Album name cannot be displayed during WMA play.
Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display switches as shown
below.
In Tuner source
Information Display
Frequency
Station name or Frequency
"SNPS"
Switching Display
Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1 Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2 Enter Speaker Setting mode
Press the [Q] button.
3 Select the Speaker type
Press the [
4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Display
OFF "SP OFF"
For the OEM speaker "SP OEM"
For 6 & 6x9 in. speaker "SP 6/6x9"
For 5 & 4 in. speaker "SP 5/4"
4 Exit Speaker Setting mode
Press the [Q] button.
Speaker Setting
— 11 —
KDC-MP225B_U.S 04.12.10 11:19 AM Page 11