Kenwood APCO P25 TK-5710 - Manual (Page 41)

36
■ P
LAYBACK
To play back a recorded conversation, memo, or message:
1 Press the key programmed as Playback to enter Playback mode.
• If the last action on your transceiver was to auto record your conversation,
“STORE?” will appear on the display, otherwise a memory channel with the
time of the recording will appear. To store the conversation record in the next
available memory channel, press the PF 4 key. To skip to the stored memory
channels, press the PF 2 or DTMF
key. To skip back 5 seconds, press the
GRP key. To skip ahead 5 seconds, press the GRP key.
2 Press the GRP and keys or rotate the CH control to select the
memory channel you want to play back.
• “AR” represents conversation records.
• “VM” represents voice memos.
3 The transceiver will announce the channel, then the recording will
automatically play back.
• When the entire recording has been played, “END OF MSG” (end of message)
is displayed.
• To delete the selected recording, press the PF 3 or DTMF # key. To clear all
the recorded data, press and hold the PF 3 or DTMF # key. A confirmation
message will appear on the display. Press the PF 2 or DTMF
key to delete
the recording(s) or the PF 3 or DTMF # key to cancel.
V
OICE
G
UIDE
When changing the zone, channel, or operation mode, an audio voice will
announce the new zone, channel, or mode, after it has been selected. (Voice
Annunciation can be activated or deactivated by your dealer.)