Kenwood ProTalk XLS TK-3130 - Manual (Page 33)

27
B
ATTERY
S
AVE
This transceiver has been designed to give you the most out
of your battery power. The battery save function decreases
the amount of power used when a signal is not being received
and no operations are being performed.
While using the transceiver, battery save will automatically
switch ON after 10 seconds have elapsed with no operations
or received calls. Operating the transceiver or receiving a call
will switch this feature OFF until 10 seconds of non-operation
occurs again.
You can turn this function ON or OFF:
1 Turn the transceiver power OFF.
2 Press and hold the MENU key while turning
the transceiver power ON (for 1 second).
3 Press the
▲ or ▼ key to select “ ”.
4 Press the MENU key to select “ ” (battery
save on) or “ ” (battery save off).
5 Press the PTT, MON, or CAL key to exit
Setting Mode.