Kodak KLIC-8000 - Manual (Page 13)

Doing more with your camera
www.kodak.com/go/z712support 13
Using burst
Press the Drive button to choose a burst mode.
1 In most Still modes, press the Drive button repeatedly
to choose an option.
2 Press the Shutter button halfway to focus and set
exposure.
3 Press the Shutter button completely down and
hold it to take pictures.
The camera stops taking pictures when you release the
Shutter button, when the pictures are taken, or when
there is no more storage space.
NOTE: During Quickview, you can delete all pictures in the burst series. To delete selectively, do so in Review
(see page 20 ). Burst is not available when shutter speeds are longer than 0.5 seconds.
Mode Icon Description Purpose
First
Burst
Camera takes up to 6 pictures while the
Shutter button is pressed. Capture an expected event.
Example: A person swinging
a golf club.
Last
Burst
Camera takes up to 30 pictures while the
Shutter button is pressed. When the Shutter
button is released, only the last 6 pictures are
saved. Capture an event when the
precise timing is uncertain.
Example: A child blowing
out birthday candles.
.Drive
urg_00672.book Page 13 Thursday, August 16, 2007 8:32 AM