Kenwood B64-3537-00/00 KDC-W5037Y - Manual (Page 29)

English | 29
Connecting Wires to Terminals
MUTE
P.CONT
ANT CONT
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
REMO.CONT
Battery wire (Yellow)
Ignition wire (Red)
FM/AM antenna input
Antenna Cord (ISO)
Antenna Conversion Adaptor
(ISO–JASO) (Accessory
3)
To connect the Kenwood navigation system, consult
your navigation manual.
Wiring harness
(Accessory
1)
If no connections are made, do not
let the wire come out from the tab.
Power control/Motor antenna
control wire (Blue/White)
TEL mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse (10A)
See next page
Steering remote control
(Light Blue/Yellow) (KDC-W5037 only)
To Kenwood disc changer/
External optional accessory
To connect these leads, refer to the relevant
instruction manuals.
Rear left output/Sub Woofer left output (White)
Rear right output/Sub Woofer right output (Red)
AUX input (Stereo)
Use the mini-plug which is stereo type
and does not have any resistance.