Kodak INNOVATION A-61506 User Manual

Page 17

A-61506 September 2006

6. Click OK when the image displayed on the right side of the

Brightness and Contrast Control main window is acceptable.

NOTE: Selecting Cancel will undo any changes and restores the

image on the right side of the Brightness and Contrast
Control main window to match the original image (on the
left side).

7. Select Color Tables>Save. The Save Color Table dialog box will be

displayed:

8. Enter a color table name in the Filename field and click Save. This

custom color table will be saved in the directory shown in the Save
Color Table dialog box and is available for download to your scanner
to be used in production.

NOTE: If you change the default directory path which appears

in the Save Color Table dialog box, you may have to
navigate to find this table during production. The scanner
TWAIN device driver uses this directory by default
(C:\“windows”\twain_32\kodak\kds_“scanner”\ColorTables).
For ISIS applications, color tables should be placed in the
ISIS default directory
(C:\"windows"\pixtran\ColorTbl\“scanner”). You can navigate
to this directory using the Save Color Table dialog box or
copy files manually after they have been saved, or use the
Install to TWAIN or Install to ISIS options.

9. Select File>Save Corrected Image. The Save Image File dialog

box will be displayed. This allows you to save the image on the right
side of the main window to your hard drive for future reference when
verifying your custom color table.