beautypg.com

Kodak INNOVATION A-61506 User Manual

Page 16

background image

A-61506 September 2006

15

Using a previously
captured image as a
starting point

IMPORTANT: You must use an uncorrected image as your starting

point for any activity which will result in the creation of a
custom color table. If you do not choose an uncorrected
image the following message will be displayed, The
origin of this image cannot be determined from the
file! It may not have been originally scanned with
NULL color tables, and is therefore not a valid image
for use in this application.

1. Open the Brightness and Contrast Control application. The

Brightness and Contrast Control main window will be displayed.

2. Select File>Open Image. The Open Image File dialog box will be

displayed.

3. Select the desired image file and click Open. The selected image

will be displayed on both sides of the main window.

4. Select Tools>Brightness and Contrast. The Brightness and

Contrast dialog box will be displayed.

5. Adjust the Brightness and Contrast slider bars until you are satisfied

with the color image quality of the image that is displayed on the
right side of the main window. As you move the Brightness and
Contrast slider bars, the changes in the brightness and contrast will
be visible on the right side of the window when you release the
mouse button. Optionally, you may enter a value in the Brightness
or Contrast fields. Acceptable values are: -50 to +50.