Adding and removing satellites – Kathrein UFD 540 User Manual

Page 43

Text mode
Original mode

Adding and Removing Satellites

After pressing the





button, you are asked if you want to add the

satellites.

Confirm it with

.

The following message appears

You can now make the respective entries to your receiving system in

the corresponding positions using the





and





buttons

and exit the menu by pressing



three times. At the same time the

new station data is stored.

Entering satellite names

You can change the satellite name in the LNB configuration menu us-
ing the number buttons. Refer to section "Operating instructions" for
information about the exact procedure.

Removing satellites

To remove a satellite, select the "LNB configuration" menu, move the

cursor bar with





and confirm by pressing the





but-

ton. You will now be asked whether you wish to remove the satellite.

You can either confirm your selection with



or cancel with

