Kathrein UFD 540 - Manual (Page 21)

Programme Selection
21
Programme Selection
This section describes how you select TV programmes with your re-
ceiver and how you can set the desired volume.
In this description of the functions, it is assumed that the receiver has
been connected correctly.
If you wish to connect the receiver yourself, please read the section
"Connection and start-up" beforehand.
Selecting a TV programme
Reception status
The following information describes how to select other channels and
shows what the on-screen displays look like. After switching on the
receiver, simply press the

buttons in order to select other
TV programmes in their ascending or descending order in the channel
memory.
Every time you press the button, an on-screen display shows you the
selected programme together with the time, the programme start and
end times as well as the programme title in the information box, pro-
vided this data is transmitted together with the signal.
Press the

button and this information box is permanently dis-
played. Press the button once more and the display disappears.
You will receive the "channel scrambled" message for scrambled
channels.
You can receive these programmes with the UFD 540 only with CA
module and card.