beautypg.com

Rear panel, Front and rear panel – KORG Synthesizer/Vocoder MICRO User Manual

Page 10

background image

4

Front and rear panel

OUTPUT

L/MONO

,

R

jacks

Connect these to your powered
monitors, stereo amp, mixer, or
multi-track recorder.
If you want to use the microKORG
in monaural, connect the L/MONO
jack.

HEADPHONES

jacks

Connect a pair of
headphones to this jack
(1/4" stereo).

MIDI THRU

connector

Received MIDI data is
re-transmitted without
change from this
connector. Use this
when you want to
connect multiple MIDI
devices to the same
"stream" of data.

MIDI OUT

connector

This connector
transmits MIDI data.

MIDI IN

connector

This connector receives
MIDI data.

MIDI
Use these connectors to connect the microKORG to an external MIDI
device so that MIDI data can be exchanged.

MIC/LINE

switch

If a mic is connected to the DYNAMIC
or CONDENSER jack, set this switch to
the MIC position. If an external
sequencer or audio device is connected,
set this switch to the LINE position.

VOLUME 1

knob

Adjusts the input level from the
DYNAMIC

or CONDENSER jack.

CONDENSER

jack

Connect a condenser mic to this jack.

DYNAMIC

jack

Connect a dynamic mic, synthesizer, or
audio device to this jack.
If both the DYNAMIC jack and the
CONDENSER

jack are connected, the

audio signal from the CONDENSER jack
will take priority.

AUDIO IN 1
A Synth program can use an audio signal from a synthesizer or external device
connected here as the oscillator 1 waveform.
A Vocoder program can use an audio signal from a mic etc. connected here as the
modulator audio.

VOLUME 2

knob

Adjusts the input level
from the LINE jack.

LINE

jack

Connect a synthesizer
or audio device here.

AUDIO IN 2

A Synth program can use an audio signal from an
external device connected here as the oscillator 1
waveform.
A Vocoder program uses this input signal as the
external carrier for the vocoder.

Power switch
Switches the power on/off. (➝p.6)

AC adaptor jack
Connect the included AC adaptor to
this jack. After connecting the AC
adaptor to the microKORG, plug it
into an AC outlet.

Mic holder
You can attach the included
mic to this holder (➝p.5).

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Rear panel

This manual is related to the following products: