beautypg.com

Troubleshooting guide – Kenwood DPX-MP4100 User Manual

Page 30

background image

30

|

English

Some functions of this unit may be disabled by
some settings made on this unit.

!

Cannot switch to Aux source.

▲ AUX is not turned on.

(page 22)

!

• Cannot set up the subwoofer.

• No output from the subwoofer.
▲ • Preout is not set to subwoofer.

(page 22)

(page 10) is not set to ON.

• The Dual zone function is enabled.

!

Cannot set up the subwoofer phase.

▲ • Preout is not set to subwoofer.

(page 22)

(page 10) is not set to ON.

• The Dual zone function is enabled.

• Low pass filter is set to Through.

!

Cannot set up the low pass filter.

▲ • Preout is not set to subwoofer.

(page 22)

• The Dual zone function is enabled.

!

Cannot set up the high pass filter.

▲ The Dual zone function is enabled.

!

• Cannot select the output destination of the

subsource in the Dual zone.

• Cannot adjust the volume of the rear speakers.
▲ The Dual zone function is disabled.

!

• No Audio control effect on AUX.

• Cannot set up the Preout.
▲ The Dual zone function is enabled.

!

Cannot play audio files.

(page 22) is set to "2".

!

Cannot Folder select.

▲ The Scan play or Random play function is enabled.

!

Cannot set up WOW.

▲ The Dual zone function is disabled.

!

Cannot set up SRS 3D.

▲ The tuner source is in use.

!

No Audio control effect on the rear speakers.

▲ WOW item on (page 9) and SRS

WOW item on (page 9) have no
effect on the rear speakers.

What might seem to be a malfunction in your unit
may just be the result of slight misoperation or
miswiring. Before calling service, first check the
following table for possible problems.

General

?

The Touch Sensor Tone doesn’t sound.

✔ The preout jack is being used.

☞ The Touch Sensor Tone can’t be output from the

preout jack.

Tuner source

?

Radio reception is poor.

✔ The car antenna is not extended.

☞ Pull the antenna out all the way.

✔ The antenna control wire is not connected.

☞ Connect the wire correctly, referring to the

section on .

Disc source

?

The specified disc does not play, but another one

plays instead.
✔ The specified CD is quite dirty.

☞ Clean the CD.

✔ The disc is loaded in a different slot from that

specified.
☞ Eject the disc magazine and check the number

for the specified disc.

✔ The disc is severely scratched.

☞ Try another disc instead.

Audio file source

?

The sound skips when an Audio file is being

played.
✔ The media is scratched or dirty.

☞ Clean the media, referring to the CD cleaning of

the section on (page 5).

✔ The recording condition is bad.

☞ Record the media again or use another media.

Troubleshooting Guide