Kenwood DPX-MP4100 User Manual
Page 11
English
|
11
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to
attach a title to
⁄
• A title cannot be attached to MD or Audio file media.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3
Select Name set mode
Push the Control knob towards up or down.
Select the "Name Set" display.
4
Enter Name set mode
Press the Control knob for at least 2 second.
5
Move the cursor to the enter character
position
Push the Control knob towards right or left.
6
Select the character type
Press the Control knob.
Each time you press the knob, the character type
alternates between the types shown in the table
below.
Character type
Alphabet upper case
Alphabet lower case
7
Select the characters
Push the Control knob towards up or down.
⁄
•
Enter characters by using a remote control with numbers
buttons.
Example: If you are entering "DANCE".
Character
Button
Times pressed
"D"
[3]
1
"A"
[2]
1
"N"
[6]
2
"C"
[2]
3
"E"
[3]
2
8
Repeat steps 5 through 7 and enter the name.
9
Exit Menu mode
Press the [MENU] button.
⁄
• When operation stops for 10 seconds the name at that
time is registered, and Name Set mode closes.
• Memory numbers
- Tuner: 30 stations
- Internal CD player: 10 discs
- External CD changer/ player: Varies according to the
CD changer/ player. Refer to the CD changer/ player
manual.
• Change the title of station/CD by the same operation
used to name it.
TEL Mute
The audio system automatically mutes when a call
comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to