Kenwood KCA-iP500 - Manual (Page 5)

English | 5
Setting Browsing item selection
When connecting KCA-iP500 to Control unit
without the CD TEXT (disc title) display function, it is
recommended that you slide the "1" of the "SELECT
SWITCH" on the front panel of conversion box to
the up position. Selected Browsing (page 7) item
cannot be viewed on Control unit without the disc
title display function.
When you slide the "1" of the "SELECT SWITCH"
to up position (switching to the "Browsing item
selection disabled"), Browsing item is locked on to
"Playlist" and selection is disabled.
Title number 1 in Playlist in this unit corresponds to
the "Songs" in Browsing (Music menu) items.
Browsing item
selection enabled
Browsing item
selection disabled
• Set the "SELECT SWITCH" before connecting
KCA-iP500 to Control unit. If KCA-iP500 is already
connected, press the reset button on Control unit.
• For more details, access the following URL:
http://www.kenwood.com/i/kca-ip500/index.
html
Setting Title Number Display Mode
When connecting KCA-iP500 to the KVT/DDX series
etc., it is recommended that you slide the "2" of
the "SELECT SWITCH" on the front panel of the
conversion box to the up position.
• For more details, access the following URL:
http://www.kenwood.com/i/kca-ip500/index.
html
Sliding the "2" of the "SELECT SWITCH" on the front
panel of conversion box to up position allows the
title number (page 7) to be displayed with two
digits (99).
When the "2" of the "SELECT SWITCH" on the front
panel is set to down position, the title number is
displayed with one digit (9).
Title number
- 1 digit
Title number
- 2 digits
When set to "Title number - 2 digits", the title
number is displayed as follows.
• When you change the title (playlist or album title,
for example), first "EJECT" will be displayed and
then the title is changed.
• Refer to
Album, for example)> or for a
title selection.
Also, the title numbers are changed in groups of
100. For details refer to DDX Series> (page 8).