KVH Industries KVH TracVision TracVision G6 - Manual (Page 16)

Using the ADCU Interface
54-0161-01 17
3.1 ADCU Interface Functions
All TracVision G6 and GyroTrac operations are controlled and
monitored using the ADCU. An LCD display shows navigation
and configuration data and three soft keys enable you to perform
a multitude of menu-driven tasks.
During the TracVision G6 installation process, the GyroTrac and
the satellite selections should have been configured to your
specifications as detailed in the TracVision G6 Technical Manual.
Once the system is installed and functioning properly, the system
will function automatically.
However, there may be instances in which you need to access
certain settings via the ADCU interface. To assist you, KVH has
provided the following information resources:
Quick Reference Guide
The quick reference guide on the following page
illustrates the primary displays and the overall
menu structure, allowing you to easily and quickly
navigate among the ADCU menus.
Sections 3.2 through 3.6 of this User’s Guide
While the system operates automatically, there
may be instances where some adjustment may be
required, either to the selected satellites or the
ADCU display, for example. These menus,
highlighted on the quick reference guide, are
explained in greater detail in these sections.
The TracVision G6 Technical Manual
Section 3 of the TracVision G6 Technical Manual
provides a detailed explanation of every menu
option and system configuration setting. These
menus should, for the most part, be accessed by
authorized technicians.
LCD Display
Soft Keys
Figure 3-1
ADCU Front Panel