KORG K49 - Manual (Page 20)

20
The local control setting
Keyboard/Each controllers
Computer K61P
KBD/KNOB
SOUND/CTRL Tone generator
Local control on
Computer
KBD/KNOB
SOUND/CTRL
Local control off
Keyboard/Each controllers
K61P
Tone generator
The local on/off setting is set to local on if power cut off.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Program change enable/disable
Every time you select one of the K61P’s internal sounds, a MIDI program change
message is also sent to any connected MIDI equipment. This feature allows you to
prevent program change messages from being sent to your other MIDI devices.
1
Hold down [BANK] button until the K-Series enters the Setting mode.
2
Press the Program 7 [HARPSI 1/VIBE/STRINGS 1] button (the button will flash).
C8 C7 C6 C5 C4 C3 C2 C1
3
Press note C4(enable) or C#4(disable) to select the setting.
4
Press the [BANK] button to exit the Setting mode.