Kenwood KDC-HD545U - Manual (Page 29)

English | 29
Channel Scan
Every receivable Channel is checked for 10 seconds.
1 Enter Channel Scan mode
Press the [ ] button for at least 1 second.
2 Release it when the channel you want to listen
to is received
Press the [
] button.
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1 Enter Direct Access Tuning mode
Press the [DIRECT] button.
2 Enter the channel
Press the number buttons.
3 Tune in to the entered channel
Press the [ 4] or [¢] button.
Cancelling Direct Access Tuning
Press the [ ] button.
⁄
• If you make no button operation for 10 seconds, the
Direct Access Tuning mode is automatically canceled.
• If you cannot receive any signal in the input Channel due
to bad conditions on radio wave or other such problems,
“ACQUIRING SIGNAL”/ “NO SIGNAL” appears.
$AA-KPFD