Bluetooth setup – Kenwood KDC-HD545U User Manual
Page 22
22
|
KDC-BT645U/ KDC-HD545U
Bluetooth Setup
Function of KDC-BT645U
KDC-HD545U with KCA-BT200 (Optional Accessory)
Bluetooth Setup
You can select following Bluetooth Setup items.
1
Enter Bluetooth mode
KDC-BT645U: Press the [VOL] knob.
KDC-HD545U: Press the [VOL] knob for at least
1 second.
“BT MODE” is displayed.
2
Enter Function Setting mode
KDC-BT645U: Press the [VOL] knob for at least
1 second.
KDC-HD545U: Press the [VOL] knob.
“FUNCTION” is displayed.
3
Select the function item
Turn the [VOL] knob and it when the desired
item is displayed.
Select “SETTINGS”
>
Function item or select
“SETTINGS”
>
“DETAILED SET”
>
>
Function item.
Function item
Selectable setting/item
“PHONE SELECT”
Selects a cell-phone or Bluetooth audio player*
connection. Refer to
“AUDIO SELECT”**
“SMS DOWNLOAD”
Download a short message. Refer to
“SMS INBOX”
Display the received short message. Refer to
“VOICE TAG”
Registers voice for voice recognition and
voice to select the Phone number category in
Phone book. Refer to
“DETAILED SET”
Move to detailed item.
“DEVICE REGIST” Registers a Bluetooth device (pairing).
Refer to
(page 23).
“S-DVC SELECT”
“DEVICE DELETE” Cancel registration of the Bluetooth device. Refer
to
(page 23).
“PIN CODE EDIT”
Specify the PIN code required when registering
this unit using the Bluetooth device. Refer to
“AUTO ANSWER” This function automatically answers (responds
to) a call after lapse of the preset time interval
for automatic answer.
OFF: Does not answer the phone call
automatically.
0: Automatically answers the phone call at once.
1 – 8 –99: Automatically answers the phone
call after lapse of 1 – 99 seconds.
“BT SP SELECT”
You can specify the audio output speakers.
Select the speaker which is further from the
microphone in order to prevent howling or
echoes.
SP FRONT: Outputs audio from the front-left and
front-right speakers.
SP ALL: Outputs audio from the all speakers.
“CALL BEEP”
You can output a beep from the speaker when a
call comes in.
ON: Beep is heard.
OFF: Beep is canceled
“BT F/W UPDATE” Display the firmware version and update the
firmware. Refer to
“MIC GAIN”*
Adjust the sensitivity of the built-in microphone
for a telephone call. Adjust the voice of caller.
Setting to “+” increases the voice volume.
–3 – 0 – +3
“NR LEVEL”*
Reduce the noises generated by surrounding
environment without changing the built-in
microphone volume. Adjust the voice of caller
when it is not clear. Setting to “+” increases the
noise reduction.
–3 – 0 – +3
“EC LEVEL”*
Adjust the level of echo cancellation. Setting to
“+” increases the echo cancel reduction.
–2 – 0 – +2
*KDC-BT645U only
**KDC-HD545U with KCA-BT200 (Optional Accessory) only
(Factory setting: Underlined)
4
Make a setting
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Exit Function Setting mode
Press the [
] button for at least 1 second.
[SRC] [VOL]
[
] / [
E
]
[
]
[DISP]
[
]
$AA-KPFD