Kenwood EZ500 - Manual (Page 26)

26 | English
Menu system
In Standby mode
CD Read Setting
When there is a problem on playing a CD with
special format, this setting play the CD by force.
Display Setting
"CD READ 1" Play CD and MP3/WMA.
"CD READ 2" Play CD by force.
• Setting "CD READ 2" cannot play MP3/WMA.
Some music CDs may not be played back even in the
"CD READ 2" mode.
When LX AMP unit connecting
AMP Control
You can control the LX AMP connected to the
unit.
1 Select AMP Control mode
Press the [AUDIO] knob.
Select the "AMP Control" display.
• This function can be used the [FM] / [AM] button.
2 Enter AMP Control mode
Press the [MENU] button.
3 Select the AMP Control item for adjustment
Press the [AUDIO] knob.
• For the details of the AMP Control item, see the
Instruction manual attached to the LX AMP.
• This function can be used the [FM] / [AM] button.
4 Adjust the AMP Control item
Turn the [ 4] / [¢] knob.
5 Exit AMP Control mode
Press the [MENU] button.
• You cannot use the LX AMP operation during standby
mode.
In HD Radio mode
Receive mode Setting
Sets the receive mode.
1 Select the Receive mode
Press the [AUDIO] knob.
Select the "Receive Mode" display.
• This function can be used the [FM] / [AM] button.
2 Enter Receive mode
Press the [MENU] button.
3 Set the Receive mode
Press the [AUDIO] knob.
Each time the knob is pressed the Receive mode
switches as shown below.
Receive mode Display Operation
Auto mode "Auto"
Analog broadcasts and digital
broadcasts will be switched
automatically.
When both are being transmitted,
the digital broadcast will have
priority.
Digital "Digital" Digital broadcasts only.
Analog "Analog" Analog broadcasts only.
• This function can be used the [FM] / [AM] button.
4 Exit Receive mode
Press the [MENU] button.
• Even if the "Auto" setting, an analog broadcast will be
received during the reception of a ball game mode
(non-delayed broadcast program).
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display Setting
"AUX OFF" When selecting the source there’s no Auxiliary Input.
"AUX ON" When selecting the source there’s Auxiliary Input.