Kenwood EZ500 - Manual (Page 17)

English | 17
HD Radio control features
c.s.
OPEN
FM AM SRC
AUTO/AME
4/ ¢
1 - 6
ATT M P S
ST TI DAB NEWS MP3 WMA
DIGITAL ANALOG RDS PTY ATT M P S
ST TI DAB NEWS MP3 WMA
DIGITAL ANALOG RDS PTY
Preset station number ST indicator
Band display Frequency display
NOTE
With the HD Radio tuner, you can use the similar
functions to 'Station Preset Memory', 'Auto Memory
Entry', 'Tuning Mode', and 'Preset Tuning' of Tuner
features. Refer to Tuner features (page 15, 16) for
how to use the functions.
Tuning
Selecting the station.
1 Select HD Radio source
Press the [SRC] button.
Select the "HD Radio" display.
2 Select the HF band
Press the [FM] button.
Each time the [FM] button is pressed it switches
between the HF1, HF2, and HF3 bands.
Select the HA band
Press the [AM] button.
3 Tune up or down band
Turn the [ 4] / [¢] knob.
• When you connect an HD Radio, Tuner features of
the unit are disabled and switched to HD Radio tuner
features. A portion of the setting methods including
the Tuning Mode will change.
• During reception of stereo stations the "ST" indicator
is ON.
• The setting of the CRSC is always ON. Switching to
OFF is not possible.
• Using 'Receive mode Setting' (page 26) the modes
can be switched to digital broadcast automatic
switching, analog broadcast only, or digital broadcast
only.
• When "Digital" has been set with 'Receive mode
Setting' (page 26), the seek time will be longer to
allow a check of whether the transmission is a digital
broadcast.