Kenwood DPX301 User Manual
Page 5
English
|
5
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that they
work with your model and in your area.
• If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed.
• Press the reset button if the disc auto changer fails
to operate correctly. Normal operation should be
restored.
• We recommend the use of Code> (page 21) to prevent theft. • The characters which can be displayed by this unit are A-Z 0-9 @ " ‘ ` % & * + – = , . / \ < > [ ] ( ) : ; • The illustrations of the display and the panel appearing in this manual are examples used to Cleaning the Unit If the faceplate of this unit is stained, wipe it with a • Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth Before using this unit for the first time This unit is initially set on the Demonstration mode. About SIRIUS Satellite radio tuner Refer to the instruction manual of SIRIUS Satellite DISP AUTO 1 - 6 4 FM/SCRL AM C.S. ¢ SRC About DAB Tuner control Refer to A group on the Instruction manual of DAB Tuner KTC-9090DAB (optional accessory) for the 1. Select the preset band for Auto Ensemble Memory Entry. 2. Press the [AME] button for at least 2 seconds. Open Auto Ensemble Memory Entry. At the operation to press [DISP] button, use [AUTO] Notes Reset button
^ - { } | ~ .
explain more clearly how the controls are used.
Therefore, what appears on the display in the
illustrations may differ from what appears on the
display on the actual equipment, and some of the
illustrations on the display may be inapplicable.
dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off
with a cloth moistened with neutral cleaner, then
wipe it again with a clean soft dry cloth.
or using a volatile liquid such as thinner or alcohol may
scratch the surface or erases characters.
When using this unit for the first time, cancel the
radio tuner KTC-SR901/SR902/SR903 (optional
accessory), when connected, for the operation
method.
• Refer to the sections of A models for operations.
control method of DAB Tuner function.
However, the following control methods of the
function for this unit may be different from the
Instruction manual; therefore, refer to the following
supplemental instruction.
After storing in the memory finishes, the
number of the pre-set buttons and the
ensemble label are displayed.
and
button instead.