Kenwood DPX301 - Manual (Page 31)

English | 31
Installing the Unit
Installation
Accessory 4 (M5 × 7 mm)
or Accessory 5(M5 × 6 mm)
Installing in Japanese-Made Cars
and General Motors Cars
Install onto the car bracket using the supplied
screws (M5 × 6 mm, M5 × 7 mm).
The holes of the car bracket to use will differ
depending on the car model.
Car Bracket
Accessory 6
Firewall or metal support
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Metal mounting strap
(commercially available)
Bend the tabs of the mounting
sleeve with a screwdriver or similar
utensil and attach it in place.