Kyocera KM-C830 - Manual (Page 57)

Section 6 FUNCTIONS
6-10
7 Press the Enter key.
The message display will return to the “Ready to copy.”
screen.
8 Press the Start key to begin the copying procedure.
3 Use the M cursor or the N cursor key to select “x Page
separation” and then press the Enter key.
The “Select 1-sided copy mode.” screen will appear.
Inch specifications
Metric specifications
4 Use the ▲ cursor or the ▼ cursor key to select the page
separation mode that you want to use.
Inch specifications
Metric specifications
5 Press the Enter key.
• If you selected “z 2-sided to 1-sided” [“z DUPLEX >
1-SIDED”], the message display will return to the “Ready to
copy.” screen.
• If you selected “x Book original”, go to the next step.
6 Use the M cursor or the N cursor key to select the binding
direction of the original being copied.
Inch specifications
Metric specifications
Inch specifications Metric specifications