Kyocera FS-C5016N - Manual (Page 41)

39
Gently pull the
main charger han-
dle out and push it
back in. Repeat
this 2 to 3 times.
These move-
ments clean the
grid.
After cleaning, make sure you restore the main charger
unit to its home position.
If the main charger unit is not restored to its
home position, the corresponding color will be
printed over the whole page.
After cleaning is
finished, remove
the grid cleaner
from the printer
and discard it.
The grid cleaner
cannot be reused.
Use the same procedure to clean the main charger
units for the other toner containers.
6
Main Charger Unit
Note
7
FSC5016N_QG.fm 39 ページ ２００３年３月２４日 月曜日 午後１時４７分