Kenwood MASTER PROTALK TK-3131 - Manual (Page 32)

26
3 Press the ▲ or ▼ key to select “ ”.
4 Press the MENU key to select “ ” (battery
save on) or “ ” (battery save off).
5 Press the PTT, MON, or CAL key to exit
Setting Mode.
B
ATTERY
I
NDICATOR
When turned ON, the battery indicator on the display lets you
know approximately how much battery life is remaining. When
turned OFF, the battery indicator will appear and blink only
when the battery voltage level is low.
When the battery voltage becomes too low while transmitting,
the transceiver stops transmitting and a tone sounds until you
release the PTT switch. Recharge or replace the battery pack
at this time.
High battery power
Medium battery power
Low battery power
Time to recharge the battery pack
Note: This feature does not measure the accurate battery voltage
when using alkaline batteries. When using alkaline batteries in place
of the supplied battery pack, turn this function OFF.