Kodak I1860 - Manual (Page 6)

4 A-61578 September 2006
Preparing the Site
The Kodak i1860 Scanner is a new high speed, dual stream scanning
platform which provides advanced image processing and superior
throughput. The i1860 Scanner is designed to handle mixed document
batches for any production scanning workflow.
This manual provides site specification and installation information for
the Kodak i1860 Scanner.
IMPORTANT: The Kodak i1860 Scanner must be uncrated and
installed by a qualified Kodak Service
Representative. Do not open the packaging or
attempt to uncrate the scanner. Unpacking the
scanner by non-qualified personnel may be
dangerous and may void your warranty.
Before delivery Before your Kodak i1860 Scanner is delivered review and implement
the following:
1. Thoroughly review this Installation Planning Guide with your site
personnel.
• Shipping and receiving: shipping and receiving personnel
should review the specifications in this guide for the packed
weight and size of the pallet to be sure there is adequate space
available to receive the scanner.
• Building management: be sure there is adequate space for
unpacking the scanner and that the power requirements meet the
specifications outlined in this guide.
• Site department management: be sure that the computer
system administrator and all operators that will use the Kodak
i1860 Scanner are available for training on installation day.
• Computer administration department: be sure the host
computer meets the system requirements and that the
administrator has administrative authority. Plan for installation
needs (i.e., installing the FireWire card and drivers).
• Integrator: be sure the Integrator is available on installation day
and has planned adequately for site training.
2. Contact Kodak to schedule the installation and review other needs
(e.g., power audit, training, professional services, etc.)