Kenwood UBZ-LJ8 - Manual (Page 14)

12
MENU SETTINGS
Your transceiver has a hidden setting menu which allows you
to adjust a variety of features to your desired settings. To
enter Menu Setting:
1 Press and hold the
▲ key while turning the transceiver
power ON.
2 To view the various settings, press the
▲ or ▼ key.
Following are a list of the settings available:
• Beep: ON/ OFF
• Battery Type: Alkaline Batteries/ UPB-1 Battery Pack
• APO (Auto Power Off): ON/ OFF
• Auto Channel Select: Remove/ Add
• VOX (Voice Activated Control) Gain Level: OFF/ 1/ 2/ 3
• VOX Delay Time (Only available when VOX Gain Level is
not OFF. Refer to page 17.): 0.5/ 1.0/ 2.0/ 3.0 seconds
• Calling Alert Tone: 1 ~ 10
• Squelch: ON/ OFF
3 Refer to the appropriate sections below for details of
adjusting each setting.
B
EEP
T
ONES
You can turn the transceiver beep tones ON or OFF, as
desired.
1 Enter the Menu Settings (above) and
press the
▲ or ▼ key until you reach the
“BEEP” display.
2 Press the key to turn the beep tones
ON ( ) or OFF ( ).