Kenwood UBZ-LJ8 - Manual (Page 11)

9
GETTING STARTED
q q q q q Switch the Power ON by pressing and
holding the switch for approximately
1 second.
• A confirmation tone sounds.
To switch the transceiver power OFF,
press and hold the switch again for
1 second.
w w w w w Adjust the Volume by rotating the VOL
control.
• Clockwise increases the volume and
counterclockwise decreases the volume.
e e e e e Select a Channel from 1 to 8 by pressing
the
▲ and ▼ keys.
• A confirmation tone sounds each time you
press a key.
• When you receive a call on your selected
channel, you will hear audio from the
speaker and the busy icon will appear.
• To use a Group Mode number, refer to
“GROUP MODE” on page 10.
r r r r r Make a Call:
1 Press and hold the PTT switch, then
speak into the microphone to transmit.
• The transmit icon will appear.
• For best sound quality, speak into the
microphone in your normal speaking
voice while holding the microphone
approximately 3 to 4 cm (1.5 inches)
from your lips.
2 Release the PTT switch when you
have finished speaking.