Kenwood UBZ-LJ8 - Manual (Page 10)

8
I
NSTALLING
/ R
EMOVING
O
PTIONAL
A
CCESSORIES
Note: Always switch OFF the transceiver power when installing or
removing the optional accessories.
The following accessories can be used with this transceiver:
• EMC-3 Clip Microphone and Earphone
• HMC-3 VOX/PTT Headset
• KHS-21 Headset
• SMC-32 Speaker-Microphone
• SMC-33 Speaker-Microphone
• SMC-34 Speaker-Microphone
To install these accessories:
1 Open the SP/MIC tabs on the side of the transceiver.
2 Insert the accessory’s plugs into the SP/MIC jacks.
3 When you remove the accessory from the transceiver, be
sure to cover the SP/MIC jacks with the attached tabs in
order to keep dust and dirt away from the contacts.
Note:
◆ Refer to the accessory instruction manuals for detailed
instructions on each of the accessories.
◆ The transceiver is not water resistant while using accessories.