Kenwood DDX5034M User Manual
Page 30
30 DDX5034/DDX5034M
Search for Program Type
(Function of Type M/Type M2)
A program is tuned when you set its program
type. (Only when receiving the FM broadcast)
1
Enter Program Type mode
2
Select a Program Type
2
2
3
1
4
1 Program Type is displayed. Touch to select a
Program Type.
2 Scrolls the Program Type list.
3 Searches for the program type.
It is displayed when the Program type is
selected.
4 Returns to the previous screen.
3
Search a station of the selected Program
Type
Set Station Name
(Function of Type X)
Assigns a name to a station.
1
Tune in to the station to name
2
Start Name set
3
Enter the name
See
information on how to enter a name.
4
End Name set
Frequency Step Setting
(Function of Type X)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 Hz.
1
Switch the frequency step
While pressing [NAV] button and [0] button,
press the Reset button.
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.
⁄
• When the same operation is repeated, the frequency step
returns to the original setting.
• When the frequency step is changed, the frequencies in
the memory are deleted.
Radio Listening