Kenwood DPX-8030MD User Manual
Page 30
Because authorization by the Security Code is required when it's
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1
Select Security Code mode
Press the [FM] or [AM] button.
Select the "CODE STBY" display.
2
Enter Security Code mode
Press the [
38] button for at least 2 seconds.
When "CODE WRITE" is displayed, "CODE ****" is displayed.
3
Enter the Security Code
Press the [#1] — [#4] button.
Security Code
Setting the Demonstration when Power is turned ON.
Display
Setting
"Opening On"
Demonstration is carried out when Power is
turned ON.
"Opening Off"
Demonstration is not carried out when Power is
turned ON.
Opening Demonstration
Switching ON and OFF the MD Group function.
Display
Setting
"MD Group On"
Group management function is ON.
"MD Group Off"
Group management function is OFF.
The MD group functions of Group Search, Group Repeat Play,
Group Random Play and Group Select are available when an MD
with group registration is played if
Because any track without group registration is not played, register
it into any group or turn
For MD Group refer to
MD Group Setting
Switching the preout between the rear and non-fading. (In non-
fading it outputs without effect from the fader control.)
Display
Setting
"Preout Rear"
Rear preout.
"Preout N-F"
Non-fading preout.
Switching preout
Setting the operation check sound (beep sound) ON/OFF.
Display
Setting
"BEEP On"
Beep is heard.
"BEEP Off"
Beep canceled.
Touch Sensor Tone
Function Setting System
— 30 —
English
Function items in Standby:
DPX-8030MD_U.S_r3 02.3.22 3:14 PM Page 30