Kenwood DPX-8030MD - Manual (Page 20)

Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Press the [CRSC] button for at least 1 second.
Each time the button is pressed CRSC turns ON or OFF.
When it's ON, "CRSC ON" is displayed.
CRSC (Clean Reception System Circuit)
Calling up the stations in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Call up the station
Press the [#1] — [#6] button.
Preset Tuning
Putting a station with good reception in the memory
automatically.
1 Select the band for Auto Memory Entry
Press the [FM] or [AM] button.
2 Enter Function Setting mode
Press the [FNC] button for at least 1 second.
"FUNCTION SET" is displayed.
3 Select the Auto Memory Entry mode
Press the [FM] or [AM] button.
Select the "AME Ready" display.
4 Open Auto Memory Entry
Press the [
38] button for at least 2 seconds.
When 6 stations that can be received are put in the memory
Auto Memory Entry closes.
Auto Memory Entry
Putting the station in the memory.
1 Select the band
Press the [FM] or [AM] button.
2 Select the frequency to put in the memory
Press the [
4] or [¢] button.
3 Put the frequency in the memory
Press the [#1] — [#6] button for at least 2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the memory on each [#1]
— [#6] button.
Station Preset Memory
Tuner features
— 20 —
English
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 20