Kenwood DPX-8030MD User Manual
Page 11
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter clock adjustment mode
Press the [DISP] button for at least 2 seconds.
"CLOCK ADJUST" is displayed.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [
4] or [¢] button.
4
Exit clock adjustment mode
Press the [DISP] button.
Adjusting Clock
Press the [CLK] button for at least 1 second.
Each time the button is pressed for at least 1 second the clock
display turns ON or OFF.
Clock Display
— 11 —
Press the [SRC] button.
Source required
Display
Tuner
"TUNER"
MD
"Mini Disc"
CD
"Compact Disc"
External disc
"CD Changer"/"MD Changer"
Auxiliary input
"AUX"
External TV
"TV"
Standby (Illumination only mode)
"ALL OFF"
• When a medium containing MP3/WMA is inserted, an MP3/WMA
file can be played by selecting CD source ("Compact Disc").
• AUX mode is only available when "AUX" is turned ON in the
Function setting (page 31).
• "AUX"/"AUX1" is displayed in the Auxiliary input source at the initial
state but can be changed in
15).
• If AUX has two sources with the optional accessories (to be
separately purchased), select the AUX source as shown below:
Select AUX source from
Display (after being selected)
This unit
"AUX"
KCA-S210A
"AUX1"
CA-C1AX
"Disc Changer" ("AUX Mode")
CD changer having AUX input
"CD Changer2" ("AUX Mode")
Selecting the Source
Turning the Demonstration ON or OFF.
Press the [DEMO] button for at least 2 seconds.
Each time the button is pressed for at least 2 seconds the
Demonstration turns ON or OFF.
When it’s ON, "DEMO ON" is displayed.
Demonstration
DPX-8030MD_U.S_r3 02.3.22 3:13 PM Page 11