Choosing a connection type, Wireless (wi-fi) connection ethernet connection – Kodak 1K5857 User Manual
Page 2
1
www.kodak.com/go/aiosupport
1
Choosing a Connection Type
Make sure you completed the steps in the Start Here Guide. Then choose one of the following connection
types for your printer, and see the corresponding chapter for instructions.
NOTE:
• You can change your connection type later. See the chapter
Configuring Your Printer
in the
Extended User Guide.
• For additional networking information or troubleshooting, go to
www.kodak.com/go/inkjetnetworking
.
Wireless (Wi-Fi) connection
Ethernet connection
To connect your printer to a wireless network, see
Setting Up the Wireless (Wi-Fi)
Connection, page 2
.
To connect your printer to a wired network using an Ethernet cable, see
Setting Up the
Ethernet Connection, page 4
.
MS SD
/HC MM
C
Rotate
Back Home
urg_01108.book Page 1 Thursday, October 22, 2009 7:41 PM