Kenwood KDC-MPV5025 - Manual (Page 32)

Connecting Wires to Terminals
TEL MUTE
ANT.
CONT
P.CONT
FRONT • L
FRONT • R
REAR • L
REAR • R
– +
REAR
FRONT
FM/AM antenna input
Fuse (10A)
Wiring harness
(Accessory
1)
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse
box
Battery
If no connections are made, do not let the wire come out
from the tab.
Dimmer control wire (Orange / White)
To car light control switch
External amplifier control wire
(Pink / Black) (KDC-X579 only)
To "EXT.AMP.CONT." terminal of the amplifier having the
external amp control function.
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
To KENWOOD disc changer/
Sirius satellite radio tuner/
External optional accessory
To connect these leads, refer to
the relevant instruction manuals.
Power control/Motor antenna
control wire (Blue/White)
Connect either to the power control terminal when
using the optional power amplifier, or to the antenna
control terminal in the vehicle.
Do not let the wire come out from the tab.
Not Used
To connect the KENWOOD navigation system,
consult your navigation manual. TEL mute wire (Brown)
Connect to the terminal that is grounded when either
the telephone rings or during conversation.
KDC-X579 KDC-MPV525/MPV5025/MP425
A Rear output
B Front output
Front output
C Subwoofer output Rear output/ Subwoofer output
Left output (White), Right output (Red)
A
B
C
32 | English