Kenwood KDV-MP5042U - Manual (Page 24)

24 | KDV-415U/ KDV-MP5042U
Tuner Operation
Function of KDV-MP5042U
Frequency Step Setting
Changing the tuning frequency step.
The original setting is FM band 50 kHz.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
2 Switch the frequency step
While pressing the [1] and [5] buttons, press the
[SRC] button.
Release your fingers from the button after the
display appears.
The frequency step changes to FM band 200 kHz.
⁄
• When the same operation is repeated, the frequency
step returns to the original setting.
• When the frequency step is changed, the frequencies in
the memory are deleted.
Activating Security Code
When Security Code is set, possibility of theft
is reduced because input of Security Code is
prompted to turn on the unit once it is turned off.
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1 Select Standby
Press the [SRC] button.
Select the “STANDBY” display.
2 Enter Security Code mode
Press [ ] 1 sec. , and select “MENU” > “CODE SET”.
Press the [AUD] knob for at least 1 second.
When “ENTER” is displayed, “CODE” is also displayed.
• For how to select Function Control items, refer to
(page 10).
3 Enter Security Code
Operation type Operation
Select the digits to enter Press the [ 4] or [¢] button.
Select the Security Code
numbers Turn the [AUD] knob, or press the
[FM+]/ [AM–] button.
4 Confirm the Security Code
Press the [AUD] knob for at least 3 seconds.
When “RE-ENTER” is displayed, “CODE” is also
displayed.
5 Do the step 3 through 4 operation, and reenter
the Security Code.
“APPROVED” is displayed.
The Security Code function activates.
⁄
• If you enter the wrong Code in steps 3 through 4, repeat
from step 3.
• When the Security Code function is activated, “CODE
SET” changes to “CODE CLR”.
• To deactivate the Security Code function, see the next
section .
6 Exit Security Code mode
Press the [ ] button.
Other Functions