Kenwood KRC-38MR - Manual (Page 9)

You can choose between auto seek tuning of receivable
frequencies and manual tuning.
Press the SRC (source) button repeatedly to select the tuner
mode. “TUnE” is displayed when the tuner mode has been
selected.
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between FM1, FM2, and FM3 (which are used for groups of
preset stations).
Press the AM button to select the AM band.
Press the AUTO button to switch between auto seek tuning
and manual tuning.
The AUTO indicator lights up only when auto seek tuning is
selected.
• Auto Seek Tuning
Press the ¢ button to seek higher frequencies.
Press the 4 button to seek lower frequencies.
• Manual Tuning
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
The ST indicator lights up when stereo broadcasts are being
received.
NOTE
4
3
2
1
Tuning
Tuner features
— 9 —
SRC
EJECT
SCAN B.S/RDM REP
DISC
DISC LOUD
PWR
OFF
A.ADJ
B NR D.SCN MTL/M.RDM
CRSC
AUTO AME ADJ CLK
#1~6
4 ¢ SRC FM/CRSC
AM AUTO/AME
ST indicator
Frequency
Preset station number
AUTO indicator
indicator
Band display
KRC-408_U.S_K_ms r3 00.12.27 0:09 PM Page 9