Kenwood KRC-38MR - Manual (Page 21)

— 21 —
Installation
Accessory7
Screwing the Faceplate on the Unit
■
Never insert the taptite screw (ш4 Ч 16 mm) in any other screw
hole than the one specified. If you screw it in another hole, it will
contact and may cause damage to the mechanical parts inside
the unit.
2CAUTION
If you want to fasten the faceplate to the main unit so that it
does not fall off, screw in the provided screw (ш4
Ч 16 mm) in
the hole shown below.
KRC-408_U.S_K_ms r3 00.12.27 0:09 PM Page 21