Kenwood KRC-38MR - Manual (Page 8)

display the time.
Press the CLK button for at least one second to enter the clock
adjustment mode. The time display will blink.
• Adjusting the hours
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
• Adjusting the minutes
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
Press the CLK button to end the clock adjustment mode. 4
3
2
Adjust the time.
When the time is not displayed, first press the CLK button to 1
Adjusting Time
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate:
Press the release button.
The faceplate is unlocked, allowing you to detach it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case while detached.
• Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
Reattaching the Faceplate:
Align the projections on the unit with the grooves on the
faceplate.
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit. 2
1
NOTE
Projections
Grooves
Release button
Theft Deterrent Faceplate
General features
— 8 —
English
KRC-408_U.S_K_ms r3 00.12.27 0:09 PM Page 8