Kenwood KVT-696 - Manual (Page 29)

English 29
20
20
19 21
o Memorized stations are displayed. Touch to
tune in.
; Scrolls the list.
a (FM band only) Switches the list display
name to Station name or Program Service
Name.*
1
⁄
• * 1 North American sales area only
Seek Mode
Sets a station selection.
The mode is switched in following order each
time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after another.
"MANU" Switches to the next frequency manually.
Frequency Step Setting
(Australia only)
Changing the tuning frequency step. The original
setting is FM band 50 kHz, and AM band 9 kHz.
1 Switch the frequency step
While pressing [VOLUME] button and
[SRC] button, press the Reset button.
Release your fingers from the buttons after the
display appears.
The frequency step changes to FM band 200
kHz, and AM band 10 kHz.