Kodak 1200I - Manual (Page 4)

Continued >
Kodak 1200i Printer
n
Fans Only, 4 Bi
HA, PS
l
Fans Only, 6 Bi
HA, PS
n
Fans Only, 4 Bi
HA, PS
u
n
Fans Only, 3 Bi
LT, HA, PS
l
Fans Only, 4 Bi
HA, PS
l
2, 8 Bi
LT, HA, PS
l
2, 8 Bi
LT, HA, PS
l
2, 6 Bi
LT, HA, PS
l
2, 6 Bi
LT, HA, PS
l
6, 6 Bi
PS
l
6, 6 Bi
PS
Kodak Coated Matte Print Paper / 140g: For excellent color in
high-quality, low-cost composites, signs and posters.
Kodak Coated Matte Print Paper / 90g: For high-quality, low-cost
composites, maps and charts.
Kodak Self-Adhesive Coated Matte Print Paper / 100g:
For self-adhesive prints with a no-glare matte surface.
Kodak Water-Resistant Removable Vinyl / 6mil: A cost-effective
durable vinyl material with a repositionable adhesive backing for easy
mounting. Its matte surface eliminates reflections, making it ideal for
outdoor signs.
Kodak Water-Resistant Self-Adhesive Vinyl / 6mil: Durable vinyl
material with an adhesive backing for easy mounting. Its matte surface
eliminates reflections, making it ideal for outdoor signs.
Kodak Water-Resistant Scrim Banner / 17mil: High-performance
material for indoor and outdoor signage with excellent image quality
and durability. This reinforced vinyl with polyester scrim center provides
100% opacity and is ideal for sewing and using grommets.
Kodak Water-Resistant Poly Poster Matte / 8mil: A matte finish
polypropylene film for durable, rich-color displays. Water-resistant
properties are excellent for unlaminated outdoor banners and
signs with pigmented based inks.
Kodak Water-Resistant Self-Adhesive Poly Poster Matte / 9mil:
A matte finish polypropylene film for durable, rich-color displays.
Permanent self-adhesive backing is easily mountable on most smooth
surfaces. Water-resistant properties are excellent for unlaminated
outdoor signs with pigment based inks.
l
2, 8 Bi
T, LT, HA, PS
l
2, 6 Bi
LT, HA, PS
l
2, 8 Bi
T, LT, HA, PS
l
2, 6 Bi
LT, HA, PS
V
in
yl & Banner
s
C
oat
ed P
aper
s
Qi Dye Qi Pigment
Quick Switch Guide Page 4 of 7
Media Compatibility, Printer Settings and Laminate Compatibility
Media Compatibility
Media Setting
Laminate Compatibility
How To Read This Chart
2, 3 Bi*
T, LT, HA, PS
Heat Activated Thermal Laminate, 210-240°F (99-116°C)
Low Temp Heat Activated Laminate, 185-195°F (85-91°C)
Heat Assisted Laminate, 185-195°F (85-91°C)
Pressure Sensitive Laminate, Ambient to 120°F (45°C)
Lamination not applicable T
LT
HA
PS
N/A
[ ]
l
n
n
u
N/T
Printer Heater Settings and Print Mode options
(See below for more detail)
Recommended for all applications
Recommended for all applications when
laminated/overcoated
Recommend for low ink coverage and line art
Not Recommended
Not Tested
Media Compatibility Laminate Compatibility
Media Settings
*Printer Heater Settings and Print Mode options can be selected on the Kodak 1200i printer control panel or in a host RIP application. Print Mode options are represented by number
of passes and direction of printing. A recommendation of 3 Bi means 3 passes, bi-directional printing. For more information, see Special Printer Notes below.