Keys Fitness HT-ELITE - Manual (Page 8)

Assembly
8
5. Attach left inside handle cover and left outside handle cover to left upright using phillips
screw ST4.2x13 (Qty. 3) as shown in Figure 5.
Repeat assembly step for right side handle covers.
Figure 5
Figure 6
6. Tighten all allen bolts (Qty. 8) installed in Step 3. Note: Move the fenders up to access the
allen bolts.
Next, attach both left and right fenders to base using phillips screw ST4.2x13 (Qty. 2) and
phillips screw M6x12 (Qty. 2).