Menu operation, Menu system, Activating security code – Kenwood eXcelon KDC-X492 User Manual
Page 12
12
|
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338
Menu Operation
Menu System
Set up the following functions;
Display
Setting
Setting overview
Source
“SECURITY
SET”/
“SECURITY
CLR”
Refer to
page 12
Sets/Resets security code
“CLOCK
ADJUST”
Refer to
page 13
Sets the clock.
“DISPLAY”
ON*/OFF
Turns off the display when no
operation is performed.
—
“DIMMER”
*
1,2,3
AUTO*/OFF Dims the display in conjunction
with the light switch of the
vehicle.
“DIMMER”*
4
ON/OFF*
Adjusts the brightness of
the display according to the
surrounding illumination.
—
“DOT LINE”
ON*/OFF
Specifies whether to display the
red dotted line on the display.
“SWPRE”*
3,4
REAR*/
SUB-W
Sets the preout output.
“AMP”*
1,2
ON*/OFF
Turns on/off the built-in amplifier.
“AMS
CONTROL”*
1
Refer to
page 13
Controls the connected LX
amplifier.
—
“ZONE2”*
1,2,3
REAR*/
FRONT
Specifies the destination of AUX
input sound when the Dual Zone
function is turned on.
“SUPREME”
ON*/OFF
Turns ON/OFF the Supreme
function.
“CRSC”
OFF/ON*
Switches to Monaural to decrease
noise when reception is poor.
“NAME SET” Refer to
page 14
Sets the display when switched
to AUX source.
“SCROLL”
AUTO*/
MANUAL
Specifies whether the text is
scrolled automatically.
—
“RECEIVE
MODE”
Refer to
page 14
Sets the receive mode of HR radio.
“ESN”
—
Displays the Electronic Serial
Number of satellite radio.
“AUX”
OFF/ON1*/
ON2
Sets whether to display AUX
during source selection.
“CD READ”
1*/2
Sets the CD read mode.
“DEMO
MODE”
Refer to
page 14
Specifies whether to enable
demonstration.
—
*Factory setting
*1 Function of KDC-X492.
*2 Function of KDC-MP438U.
*3 Function of KDC-MP408U.
*4 Function of KDC-MP338.
Displayed item is depending on currently selected
source. The mark in Source column shows the
source to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set during FM reception.
: Can be set during Satellite radio source.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
— : Can be set during all sources.
1
Enter Menu mode
Press the [M.JOG] button for at least 1 second.
“MENU” is displayed.
2
Select the menu item
Push the Control knob towards up or down.
3
Set the menu item
Push the Control knob towards right or left.
4
Exit Menu mode
Press the [M.JOG] button.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• ”ZONE2” is displayed when ”2ZONE” in
(page 7) is set to ”ON.
• Refer to the
menu items.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Activating Security Code
⁄
• You can set the Security Code with a 4 digit number of your
choice.
• The Security Code cannot be displayed or referenced. Make
a note of the Security Code and treasure it up.
1
Select Security Code item during Menu mode
Select the “SECURITY SET” display.
For how to select menu items, refer to