Konica Minolta Dimage X20 - Manual (Page 38)

38 R
ECORDING
-
ADVANCED OPERATION
DRIVE MODES
Single-frame advance - to take a single image each time the shutter-release button is
pressed. This is the camera’s default setting.
Self-timer - to delay the release of the shutter (p. 39). Used for self-portraits.
Continuous advance - to take multiple images when the shutter-release button is
pressed and held (p. 40).
Self-portrait - to take a self-portrait using the self-portrait mirror on the front of the
camera (p. 41).
Multi frame - to capture a series of nine thumbnails within an image when the shutter
-release button is pressed once (p. 41).
The drive modes control the rate
and method of image capture.
Indicators indicating the selected
drive mode appear on the monitor.
The drive mode is selected in the
main menu of the recording-mode
(p. 34). If auto reset (p. 52) is
active, the drive mode is reset to
single-frame advance when the camera is turned off.
38 R ECORDING - ADVANCED OPERATION