Standard equipment and specifications, A. maximum lift height at pivot pin 83, B. maximum height under bucket 78 – Servis-Rhino 2407TL User Manual
Page 43: C. clearance with bucket dumped 66, D. reach at maximum lift height 30, E. maximum dump angle 45, F. reach with bucket on ground 59, G. bucket rollback angle 25, H. digging depth 4, I. overall height in carry position 47.50
OPERATION
2407TL 01/11
Operation Section 4-3
© 2011 Alamo Group Inc.
OPERA
T
ION
1.
Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 60” bucket, external hydraulic system of 8.0 GPM with engine operating at 2900 RPM and
relief setting of 2000 PSI.
Horsepower Range
20-30 HP
System pressure/flow rate
2000 PSI/ 8 GPM
Lift Capacity to maximum height
1035 lbs.
Breakout force at pivot pin
1770 lbs.
Total weight with bucket (approx.)
735 lbs.
Raising time to full height
2.7 sec.
Lower time
2.0 sec.
Bucket dump time
2.6 sec.
Bucket rollback time
2.6 sec.
Hydraulic system flow
8 GPM
System pressure at rated flow
2000 PSI
A.
Maximum Lift Height at Pivot Pin
83”
B.
Maximum Height Under Bucket
78”
C.
Clearance with Bucket Dumped
66”
D.
Reach at Maximum Lift Height
30”
E.
Maximum Dump Angle
45°
F.
Reach with Bucket on Ground
59”
G.
Bucket Rollback Angle
25°
H.
Digging Depth
4”
I.
Overall Height in Carry Position
47.50”
(Manufacturers estimated specifications and design subject to change without notice.)