Socket Mobile Series 9 - Manual (Page 3)

Table of Contents
COPYRIGHT NOTICE 2
1 | INTRODUCTION 5
About the Software 5
About Combining Scanning with Bluetooth 6
System Requirements 7
Package Contents 7
Product Registration 7
Hardware and Software Indicators 8
Scanning Tips 9
About the Cable Break Away 10
2 | HARDWARE PREPARATION 11
Charging and Installing the Battery 11
Assembling and Putting on the CRS 12
3 | SETUP FOR WINDOWS MOBILE 15
STEP 1: Install the Software 16
STEP 2: Configure Scanner Settings 18
STEP 3: Connect CRS to Host Device with Bluetooth 20
STEP 4: Assemble and Put on the CRS 22
STEP 5: Scan Data into Your Application 22
OPTIONAL: Select Symbologies 24
OPTIONAL: Configure Prefix/Suffixes 25
OPTIONAL: Configure Sound 26
OPTIONAL: Run Scan Demo 27
4 | SETUP FOR WINDOWS XP 28
STEP 1: Install the Software 29
STEP 2: Configure Bluetooth Settings 31
STEP 3: Configure Scanner Settings 37
STEP 4: Start SocketScan and Connect to CRS 39
STEP 5: Assemble and Put on the CRS 40
STEP 6: Scan Data into Your Application 40
OPTIONAL: Assign Sound and Prefix/Suffix Settings 42
OPTIONAL: Configure Advanced Bluetooth Settings 43
OPTIONAL: Assign a Remote Trigger Button 45
OPTIONAL: Select Symbologies 46
TABLE OF CONTENTS 3