Samsung ANYCAM SNC-35E - Manual (Page 8)

1-3-2 Windows XP Uninstallation
If the camera is not operating properly, complete the following steps:
a. Disconnect the SNC-35E from your PC
b. Click Start > Run then type “regedt32” into the box in the Run menu to run
the Registry Editor
c. Remove the three files in the ROOT_HUB by taking the following path: My
Computer > HKEY_LOCAL_MACHINE > SYSTEM > ControlDet001
> Enum > USB
If you cannot remove above files. Complete the following:
a. Select the USB folder and click “Edit”.
b. After selecting “Permissions….”, Choose “Allow” in the list of “Permissions
for Everyone”
Note: Delete the following three files. Vid_055d&Pid_9002,
Vid_055d&Pid_9002&MI_00, Vid_055d&Pid_9002&MI01 (Some files
are hidden in the folder depending on the method of installation).
Restart the system. (You will have to reinstall the camera after restart)
4 Reinstallation
If there are any operational problems or the camera cannot be used due to a problem
that has occurred during use, the AnyCam driver and the program must be reinstalled.
In regard to the reinstallation method for the AnyCam application, insert the
installation CD provided with AnyCam into the CD-ROM drive, and click on the
“Program” button on the default installation window. The program will be reinstalled.
(The figure to the right will appear at reinstallation, to continue without uninstalling
the program. Click “yes”.)
8