Speco Technologies SIPT5 - Manual (Page 49)

2-45
2.3.14 Save Reboot
This section tells you how to save all the settings and reboot this IP device.
This is critical because some settings might not take effect before save and
reboot.
z STEP 1: Click the [Save and reboot] on the “Main Setup page”.
The “Save and reboot page” is displayed as below.
z STEP 2: The Action LED indicator will light down to indicate that the
IP device is rebooting. After around 30 seconds, the Action LED will
light up again to indicate that the reboot is completed.